‘A’ Model High Pressure Misting Spray Nozzles
‘A’ Model High Pressure Misting Spray Nozzles are compact hydraulic atomising nozzles designed to deliver extremely fine misting performance in demanding spray systems. Built for high-pressure operation, they can produce droplets below 10 microns at 70 bar, making them ideal for applications where fast evaporation, fine coverage and efficient atomisation are important.
Common uses include humidification, outdoor cooling, dust control and odour control. These nozzles are typically supplied with an internal check valve to help reduce dripping, with non-check versions available on request.
Material options include SS AISI 303 and brass with a nickel-plated body, depending on model selection.
- High-pressure hydraulic atomising nozzle for very fine mist generation.
- Compact design suited to space-conscious misting systems.
- Selected models can produce droplets of less than 10 microns at 70 bar.
- Typically supplied with an internal anti-drip check valve.
- Non-check versions available on request.
- Suitable for humidification, outdoor cooling, dust control and odour control.
- Available in SS AISI 303 and brass nickel-plated / stainless steel combinations.
- Standard connection thread: 10/24 UNC/2A.
- Flow orifice sizes available from 0.15 mm to 0.50 mm.
- Standard VITON O-ring construction.
More Information
‘A’ Model High Pressure Misting Spray Nozzles are designed for applications that require very fine atomisation from a compact hydraulic nozzle. Their key advantage is the ability to generate an extremely fine mist while maintaining a small physical footprint, making them suitable for installations where space is limited but spray performance remains critical. At operating pressures up to 70 bar and beyond, these nozzles are capable of producing droplets of less than 10 microns on selected configurations, helping create rapid evaporation and efficient mist dispersion in the target area.
This nozzle range is well suited to environmental and process applications where a fine, consistent mist improves performance. Typical uses include humidification, outdoor cooling, dust suppression and odour control. In each of these duties, fine droplet formation helps increase contact efficiency while reducing excess wetting. That makes the range a practical solution where controlled misting is required for comfort, air quality improvement or process support.
The ‘A’ model is offered in multiple configurations to suit different installation and durability requirements. Options include models with SS AISI 303 body and head construction, as well as versions with a brass nickel-plated body and stainless steel head. Standard connection size is 10/24 UNC/2A, and flow orifice diameters are available from 0.15 mm to 0.50 mm. Depending on the selected model and operating pressure, the range offers different flow capacities and droplet size characteristics to match application demand. Standard specification includes a VITON O-ring, and the nozzles are usually supplied with an internal anti-drip check valve featuring a stainless steel spring and VITON ball. Versions without the internal check valve can also be supplied on request.
FAQ
They are commonly used for humidification, outdoor cooling, dust suppression and odour control. Their very fine atomisation makes them especially useful where quick evaporation and efficient mist dispersion are needed.
Selected models can produce droplets below 10 microns at 70 bar. Depending on the chosen orifice size and pressure, droplet size characteristics vary across the range to suit different misting requirements.
Yes. They are usually supplied with an internal check valve designed to help prevent dripping after shut-off. Versions without the internal check valve are also available when required for specific system designs.
The range includes stainless steel and brass nickel-plated versions with stainless steel heads. Standard connection size is 10/24 UNC/2A, with flow orifice options from 0.15 mm to 0.50 mm.